28 GPM 2-Stage Hydraulic Log Splitter Pump, Mount Coupler & A7 Detent Valve Kit

Description

28 GPM Log Splitter Pump, Mount, A7 Detent Valve and Coupler Kit w/Bolts
From Tool Tuff Direct - Your Source for Log Splitter Parts Since 2012!
28 GPM Two Stage Log Splitter Pump
This Versatile, high quality pump is ideal for Log Splitters or any other piece of equipment requiring high speed low pressure and low speed high pressure circuits.
21 and 7 GPM gear sets combine for 28 GPM total.
Max Pressure 4000psi intermittent, 3000PSI continuous.
Max RPM: 4000
Shaft size 5/8"
Keyway
3/16"
Inlet 1" npt
Outlet 3/4 not
SAE 2-Bolt Mount
Requires about 15 hp or more to run efficiently.
Looking at shaft side, pump rotates clockwise - Your engine must spin counter clockwise when looking at the shaft!!!!
Pump can be mounted in vertical or horizontal positions - must have 100% positive fluid supply or pump will burn up.
Large Pump Mount
New Hydraulic Pump & Gas Engine Adapter Mount
Make sure this will fit before ordering as not all engines have standard mounting
Works with any of the 22gpm and 28gpm 2-stage log splitter pumps
The hole pattern for the pump side is the standard SAE-A 2-bolt pattern
Bracket Length is approx. 5.5"
Holes on engine side are 3.5" apart in a square pattern (5" bolt circle)
LoveJoy Coupler
This kit includes two coupler halves and one rubber spider. The default set is L090 5/8" for the pump side and 1" diameter for the engine side. Please message us when you order if you need a different size for your engine's crankshaft. We have most common sizes in stock
Pump to Mount Bolts, Lock Washers, Nuts
Includes the required bolts, nuts and lock washers required to
A7 Auto-Return Log Splitter Valve
(
We have other valves available - if the schematic looks different than your valve, message us and we can substitute it)
Valve Specs:
Single spool, Open center.
·
Max pressure rating: 3500psi.
·
Relief valve set at 3100psi but is adjustable.
·
Working ports ½”NPT.
·
In/Out ports ¾” NPT
·
Detent Pressure set at 700 psi but is adjustable.
·
Compatible with most splitters (SpeeCo, MTD, Brave, Swisher etc)
·
Threaded end cap for easy detent adjustment
Mounting bracket holes (4) are 5/16-18 thread pitch and are spaced 1" x 2-5/8" apart
This is the next generation in log splitter valves. The detent is usually what wears out and causes valves to fail. This valve allows user to adjust the kick out pressure to what they need and as detent balls and grooves wear.
PAYMENT
·
We accept
PayPal
payment and
Credit Cards
.
·
We only ship to confirmed PayPal addresses or to the billing address on the credit card used to make your purchase.
·
If you need anything regarding payment, please feel free to contact us via eBay Message.
SHIPPING
·
Please note! We use FedEx or USPS for shipping.
We maintain the right to change carrier, without any notice to the buyer, so you receive your item(s) as fast as possible.
·
Your item will be dispatched within
1-2 business
days after your valued payment.
·
We currently only ship to the
48 continental states
and we do not provide international shipping.
Warranty
·
We Stand behind all of our products for
6 months
·
We will ship out
replacement
or
replacement parts
at our discretion.
RETURNS
·
If you are not satisfied with your purchase for any reason, you may return a product within
14 days
.
·
Buyers must pay the return shipping charge unless stated otherwise.
·
Return order must be in the same condition as received. If an item received was damage or defective, please notify seller within
5
days of receipt of item.
·
Prior to returning any order, please contact us via email for return address. All return orders should include your eBay user ID, eBay item number, and a brief reason for the return order.
ABOUT US
·
We strive to provide the best possible service to our customers. If you are satisfied with our product and service, please leave us a
5 STAR POSITIVE RATING
feedback as soon as you receive your order. That will help us to maintain good reputation on Ebay and it's
VITAL
for us.
·
If you are
DISSATISFIED
for any reason, please
DO
contact us via eBay message
BEFORE
leaving neutral, negative feedback or opening a case on eBay. We work hard to make sure you are satisfied and we will resolve any problem for you and will always leave positive feedback to all our customers.
CONTACT US
·
We can be reached by eBay message, please feel free to contact us about your questions, but please
DO NOT
open a dispute or give us bad feedback. We'll reply in
24 hours
during business days. Please give us one chance resolve the problem.
Thank you for looking and your valuable business.
Hours of operation are Monday through Friday 9am to 5pm MST